昂盛達ASD905移動電源測試儀

產品參數：

ASD905 移動電源測試儀前后面板功能介紹

ASD905 基本操作

開機

將ASD905 移動電源測試儀連接好市電，按下電源開關，這時LCD 顯示開機LOGO，如圖3，等待約幾秒鐘開機預熱后，移動電源測試儀初始化并進入上次關機前的測試界面，此時已經順利開機。

手動測試

移動電源測試儀開機后選擇“手動測試”，手動測試界面如圖4 所示。最上邊為功能選擇區，選擇對應 的功能會進入相應的功能界面。右上角是“幫助”鍵，按“幫助鍵”后會有相應的功能介紹操作方法等提示。 顯示界面中間區域分別為：電源、負載1、負載2，三個模塊運行及設置參數。最下邊一排是各模塊對應的 “設置鍵”和“電源鍵”，按下“設置鍵”會進入對應的參數設置界面，如圖5 所示。按下對應的“電源鍵” 則對應的模塊使能運行，同時“電源鍵”的背景色會點亮成模塊對應的顯示顏色，如圖6 所示。在“手動 測試”模式下，移動電源測試儀可當成1 臺電源，2 臺電子負載獨立使用。相應的參數可以通過3 種途徑設置：

①通過“設置鍵”進入設置菜單進行參數設置，設置完成后按“確認”鍵返回；

②可點擊設置參數區相應的參數，激活相應參數的設置功能,被激活的參數會閃爍，再通過調節旋鈕可 即時調節參數；

③可以從正面按壓調節旋鈕選擇激活需要調節的參數，被選中的參數會閃爍，再通過調節旋鈕可即時調 節參數，當10 秒內無調節動作時，對應參數會自動退出調節狀態。

昂盛達ASD905移動電源測試儀能效測試：

移動電源測試儀開機后選擇“能效測試”，能效測試界面如圖7 所示。最上邊為功能選擇區，選擇對應 的功能會進入相應的功能界面。右上角是“幫助”鍵，按幫助鍵后會有相應的功能介紹操作方法等提示。顯 示界面中間區域分別為：電源、負載1、負載2，三個模塊的運行參數及計時和能量的累計參數。最下邊一 排是各模塊對應的“設置鍵”和“電源鍵”，按下“設置鍵”會進入對應的參數設置界面，在參數設置界面 下可通過點按參數待出現數字鍵盤后直接輸入，也可以點擊要設置的項目，待參數閃爍后通過調節旋鈕來設 置參數。設置完成后按確認鍵返回，或點擊設置鍵設置其他模塊運行參數。按下對應的“電源鍵”則啟動對 應的模塊使能運行，同時“電源鍵”的背景色會點亮成模塊的對應顯示顏色。

在“能效測試”模式下，可測試移動電源充電時間及充入移動電源的能量，也可以測試移動電源放電時 間及放電能量。時間以：HH:MM 的格式顯示，電能以W?h 為單位（即1W 的功率工作1 小時等于1W?h）。 計時及能量測試支持斷點（即掉電或暫停后繼續測試）累計，若需要清除上次的測試值，請雙擊相應的測試 （計時或能量）參數區即可將參數清零，注意時間和能量會同時清零。移動電源的總體能效計算方法：

移動電源的總體能效= 放電總能量/充電總能量*100%

放電總能量：是指移動電源充飽電后放電至低壓保護狀態，放電輸出的總電能；

充電總能量：是指移動電源電量放空后充電至充飽狀態，充電輸入的總電能；

昂盛達ASD905移動電源測試儀編程測試：

  編程測試主要用于測試移動電源的充電或放電功能和參數。移動電源測試儀開機后選擇“編程測試”， 編程測試界面如圖8 所示。最上邊為功能選擇區，選擇對應的功能會進入相應的功能界面。右上角是“幫 助”鍵，按“幫助鍵”后會有相應的功能介紹、操作方法等提示。顯示界面中間區域分別為：充電測試、放 電測試（端口1）、放電測試（端口2），三個測試結果區。最下邊一排是各模塊對應的“設置鍵”和“電源 鍵”，按下“設置鍵”會進入對應的設置界面，按下對應的“電源鍵”則啟動對應的功能測試，同時“電源 鍵”的背景色會點亮成模塊的對應顯示顏色

  充電測試設置界面如圖9-a 所示，在該界面下可以設置充電電壓、延時時間（被測移動電源充電開始 到穩定的時間）、充電電流上限、充電電流下限參數值。充電電流上下限根據產品參數來設置（當被測試移 動電源實際充電電流值在上下限范圍內時，測試結果區會顯示綠色圖標；不在范圍內顯示紅色圖標；沒有連 接移動電源時顯示灰色圖標）。可以通過如圖9-a 所示的左翻鍵和右翻鍵來選擇測試項目(①→⑧)；設置完成后按“確認”鍵返回或點擊“設置”鍵設置其他功能測試參數。設置完成后按確認鍵返回，或點擊設置鍵 設置其他功能測試選項。在如圖8 所示的選擇區域中，勾選對應測試項，即可進行測試。單擊測試結果， 就可以看到詳細的參數，如圖9-b 所示。

  放電測試設置界面如圖10-a 所示，在該界面下可以選擇負載工作模式：恒流模式、恒壓模式或恒阻模 式；還可以設置放電電流、延時時間（被測移動電源放電開始到穩定的時間）、放電電流上限、放電電流下 限參數值。放電電流根據待測試移動電源產品參數來設定，例如：標稱輸出5V1A 的設備可設置放電電流為 1A。放電電壓上下限可根據USB 標準規范來設置，也可以設置更嚴苛的參數范圍（當被測試移動電源實際 放電電壓值在上下限范圍內時，測試結果區會顯示綠色圖標；不在范圍內顯示紅色圖標；沒有連接移動電源 時顯示灰色圖標）。可以通過如圖10-a 所示的左翻鍵和右翻鍵來選擇測試項目(①→⑧)；設置完成后按“確 認”鍵返回或點擊“設置”鍵設置其他功能測試參數。在如圖8 所示的選擇區域中，勾選對應測試項，即 可進行測試。單擊測試結果，就可以看到詳細的參數，如圖10-b 所示。

快速測試：

  快速測試用于生產線測試移動電源的充電參數和放電參數是否在額定的范圍內，當測試的參數在設置的 范圍內會顯示綠色圖標，不在范圍內則顯示紅色圖標，方便測試人員快速判斷。移動電源測試儀開機后選擇 “快速測試”，快速測試界面如圖11 所示。最上邊為功能選擇區，選擇對應的功能會進入相應的功能界面。 右上角是“幫助”鍵，按幫助鍵后會有相應的功能介紹操作方法等提示。顯示界面中間區域分別為：測試結果圖標和實際測試值。最下邊一排是各模塊對應的“設置鍵”和“電源鍵”，按下“設置鍵”會進入對應的 設置界面，按下對應的“電源鍵”則啟動對應的功能測試，同時“電源鍵”的背景色會點亮成模塊的對應顯 示顏色。

快速測試界面下，按電源下方的設置鍵，進入充電參數設置界面如圖12 所示。在該界面下可以設置充 電電壓、充電限制電流、充電電流上限、充電電流下限參數值。充電限制電流是防止被測試移動電源故障時 輸出電流過大而設置的一個保護電流值。充電電流上下限根據產品參數來設置（當被測試移動電源實際充電 電流值在上下限范圍內時，測試結果區會顯示綠色圖標；不在范圍內顯示紅色圖標；沒有連接移動電源時顯 示灰色圖標）。設置完成后按“確認”鍵返回或點擊“設置”鍵設置其他功能測試參數。

快速測試界面下，按負載1/2 下方的設置鍵，進入放電參數設置界面如圖13 所示。在該界面下可以選 擇負載工作模式：恒流模式或恒壓模式；還可以設置放電電流、放電電流上限、放電電流下限參數值。放電 電流根據待測試移動電源產品參數來設定，例如：標稱輸出5V1A 的設備可設置放電電流為1A。放電電壓 上下限可根據USB 標準規范來設置，也可以設置更嚴苛的參數范圍（當被測試移動電源實際放電電壓值在 上下限范圍內時，測試結果區會顯示綠色圖標；不在范圍內顯示紅色圖標；沒有連接移動電源時顯示灰色圖 標）。設置完成后按“確認”鍵返回或點擊“設置”鍵設置其他功能測試參數。 

昂盛達ASD905A移動電源測試儀擴展應用

電池容量測試：

  測試鋰聚合物電池（或其他電壓不超出10V 的電池或電池組）容量。可選配如圖14 所示測試線，連接 到移動電源測試儀的Load1 或Load2 端口，并開機設置為能效測試模式。利用負載1 或負載2 來測試，也 可以同時測試2 顆（組）電池。在負載設置界面里選擇恒流模式，恒流值及放電終止電壓根據相應電池規 格參數而定。測試時將測試線的紅色夾子連接電池正端，黑色夾子連接電池負端。測試前將儀器上的計數及 能量參數清零，以免累加到本次的測試結果中。確認無誤后按對應負載的“電源”鍵啟動測試。當電池放電 電壓低至設定的放電終止電壓時負載模塊自動關閉測試即完成了，當前設置的放電電流*計時時間就是電池 容量。同時也測試出了電池放電的電能量。

手機充電電能測試：

很多客戶都想了解移動電源充飽電后能給手機補充幾次電能？通常工程師都是按電池容量、轉換效率等 一系列參數來粗略推算。而使用ASD905 移動電源測試儀可以準確的測試到手機充電需要的電能量和移動 電源充飽后能放出的電能量，這樣就能提供客戶比較準確的數據。手機充電電能測試方法如下：

• ①先將待測試手機電能消耗至低壓關機；
• ②將移動電源測試儀開機后設置為能效測試，設置充電電壓為：5.000V充電電流限制根據實際情況設置，并將計時及能量清零；
• ③將手機充電線連接到電源測試儀Chager 端口連接線上，開啟電源模塊開始充電；
• ④待手機提示充電完成后記錄下當前測試的能量值，即為手機充電電能；

環境要求